Location
Mumbai – 400 004, INDIA.
The Stainless Steel 304 Round Bar is made of 304 grade stainless steel, as the name implies. Its chemical composition includes approximately 18% chromium and 8% nickel. The addition of manganese and nickel to the alloy results in the austenite crystalline microstructure of Stainless Steel 304 Round Bars. The material has a minimum tensile strength of 515MPa and a minimum yield strength of 205MPa. It can also operate at high temperatures.
Because of the material’s high melting point of 1400 degrees Celsius, higher operating temperatures for ASTM A276 Type 304 Rod are possible. The length ranges from 1m to 6m, and the outside diameter is 4mm to 100mm. The Stainless Steel 304 Round Bar has good oxidation resistance in intermittent service at temperatures ranging from 870 °C to 925 °C. If aqueous corrosion resistance is important, it is not recommended to use stainless steel grade 304 continuously between 425°C and 860°C. 304 Stainless Steel Round Bars have a high carbon and chromium content, which makes them highly resistant to corrosion and rust. These steels can withstand extreme temperatures and can easily be cut and shaped. These stainless steel rods are also very useful in the manufacturing of medical and kitchen appliances.
Stainless Steel 304L Round Bars are an austenitic alloy that contains 18 percent chromium and eight percent nickel. Because of its low carbon content, 304L is easily welded and exhibits excellent corrosion resistance. It is often used in oil refineries and chemical processing facilities, as well as in pulp and paper industries.
Stainless Steel 304L Round Bars are a type of cold finished
stainless steel that is available in a wide variety of thicknesses. It is often
used in the fabrication of appliances and equipment that need to be corrosion
resistant. These bars are manufactured to meet ASTM A276 standards and are
available in many different states. Stainless Steel 304L is a general purpose
stainless steel with excellent resistance to atmospheric corrosion. It is
available in a dual-certified form, which meets the low carbon limits of Stainless
Steel 304 Round Bars while still exhibiting a slightly higher strength level.
Dual-certified 304L bars combine the best properties of both grades.
304L Round Bars are available in a wide range of sizes. They
range from four to 100 mm in diameter. They are available in a variety of
finishes, and can be used in a variety of commercial applications. These bars
are commonly used in construction and commercial projects, and have high heat
resistance and geometrical strength. They are made from a stainless steel alloy
consisting of carbon, silicon, phosphorus, and chromium. Stainless Steel 304L Round
Bars are available in a variety of different sizes, including custom sizes.
This material is also available in different alloys. Stainless Steel 304L is a
great choice for many different types of applications. For instance, the alloy
is commonly used for columns, supports, walls, and railings.
Another advantage of 304L Round Bars is their high
weldability. This is largely because 304L Round Bars have excellent welding
characteristics, and they are resistant to oxidation and pitting. They are
relatively inexpensive and can be used for a variety of applications.
Stainless Steel 304H Round Bars are
available in ASTM A276 and UNS S30409 grades. Its mechanical properties are
similar to those of ASTM A276 stainless steel forged round bar. The outer
diameter of a 304H round bar is four to five millimeters. Stainless Steel 304H
Round Bar is an important component of machinery and manufacturing industries.
Its superior tensile strength and excellent welding properties make it suitable
for many industrial applications. 304H is also widely used in industrial
boilers and heat exchangers. If you’re looking for a stainless steel bar with
high corrosion resistance, consider getting 304H Round Bar.
Table of Content
| Standard | ASTM A276, ASTM A479, AMS 5513, AMS 5511, AMS 5647 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm Width: 10 to 500mm |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Channel Bar Size | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar Size | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2 to 495mm Diameter |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Flat Bars Condition | Hardened & tempered, annealed |
| Cold Rolled Bar Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rod Processing | Bar cutting to 650mm |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| UNS Designation & International Equialent for SS 304 Round Bars | |||||||||
| Type | UNS | WNR. | JIS | EN/DIN | EN/BS | EN/NF | ISO | GB | GOST |
| 304 | S30400 | 1.4301 | SUS304 | X5CrNi18-10 | 304S31 | Z7CN18.09 | 11 | 0Cr18Ni9 | 08KH18H10 |
| 304L | S30403 | 1.4306/1.4307 | SUS304L | X2CrNi19-11 | 304S11 | X2CrNi19-11 | 10 | 00Cr19Ni11 | 03KH18H11 |
| 304H | S30409 | 1.4948 | SUS 304H | – | – | – | – | – | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
| SS 304 | 0.08 max | 2.0 max | 0.75 max | 0.045 max | 0.03 max | 18 – 20 | 8 – 11 |
| SS 304L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.03 max | 18 – 20 | 8 – 13 |
| SS 304H | 0.10 max | 2.0 max | 0.75 max | 0.045 max | 0.03 max | 18 – 20 | 8 – 10.5 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 304 | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| 304L | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| 304H | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
| Stainless Steel 304 | ||||||
|---|---|---|---|---|---|---|
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
| at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
| 12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
| 49.6 at 1652 °F | 10.4 at 32 – 1500°F | |||||
| Stainless Steel 304H | ||||||
| Denstiy lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)2-psi | ||
| at 68 °F | at 68 – 212°F | at 68 – 1600°F | at 212°F | at 932°F | at 32 – 212°F | in tension (E) |
| 0.285 | 9.2 | 11.0 | 9.4 | 12.4 | 0.12 | 29 x 106 |
Check ASME SA 276 Stainless Steel 304 Round Bars, A276 SS 304L Bars dimensions and thickness chart, SA 276 304H Rods and Stainless Steel 1.4301, 1.4306, 1.4948 Industrial Round Bars price per meter in India
Stainless Steel 304 Round Bar
Stainless Steel 304 Square Bars
304 SS Round Bar
Stainless Steel S30400 Bars
SS 1.4301 Round Bars
AISI 304 Bars
SS 304 Rectangular Rods
304 SS Hex Bar
Stainless Steel 304 Polished Bars
SS 304 Bright Bars
ASTM A276 304 Stainless Steel Round Bars
ASME SA 276 304 Stainless Steel Round Bars
Stainless Steel 304L Round Bar
Stainless Steel 304L Square Bars
304L SS Round Bar
Stainless Steel S30403 Bars
SS 1.4306 / 1.4307 Round Bars
AISI 304L Bars
SS 304L Rectangular Rods
304L SS Hex Bar
Stainless Steel 304L Polished Bars
SS 304L Bright Bars
ASTM A276 304L Stainless Steel Round Bars
ASME SA 276 304L Stainless Steel Round Bar
Stainless Steel 304H Round Bar
Stainless Steel 304H Square Bars
304H SS Round Bar
Stainless Steel S30409 Bars
SS 1.4948 Round Bars
AISI 304H Bars
SS 304H Rectangular Rods
304H SS Hex Bars
Stainless Steel 304H Polished Bars
SS 304H Bright Bars Bar
ASTM A276 304H Stainless Steel Round Bars
ASME SA 276 304H Stainless Steel Round Bars
top 100 stainless steel 304 round bar dealers in pune, buy stainless steel round bar 304h, european origin stainless steel 304 round bars, japanese origin stainless steel 304l bars, korean origin stainless steel 304h bars, top supplier of ss 304 round bars, 304 stainless steel round bar price list, ss 304 round bar weight chart, stainless steel round bar 304 price, 304 stainless steel round bar specifications pdf, ss 304 bar chemical composition, ss 304 round bar manufacturers india, Grade 304 Stainless Steel Hot Finished Round Bars, 304l stainless steel round bar price list pdf, ss 304 round bar sizes, stainless steel 304l round bars supplier in india, 304 stainless steel threaded bars, stainless steel 304h hollow bars, 304h stainless steel rods sizes, 304 stainless steel round bars standards, stainless steel 304h round bars sizes chart, 304l stainless steel half roud bar, customized size black finish 304 stainless steel round bar, austenitic stainless steel 304 bar, 304 stainless steel rods sizes, stainless steel 304 round bar weight calculator, 304h ss bars manufacturer in india, ss 304l round bar chemical composition, ss 304h rods price, stainless steel 304 round bar diameter tolerances, standard ss 304l round bar sizes in mm, stainless steel 304h bar standard sizes, round bar ss 304, stainless steel 304 bar supplier in mumbai, 304l stainless steel rods manufacturer in india, ss 304h round bar supplier in india.
Jaipur, Lahore, Chennai, Istanbul, Lagos, Thane, Dubai, Coimbatore, La Victoria, London, Courbevoie, Vung Tau, Sharjah, Calgary, Jeddah, Busan, Mexico City, Al Khobar, Bangkok, Dallas, Bengaluru, Jakarta, Granada, Seoul, Cairo, Geoje-si, Rio de Janeiro, Abu Dhabi, Port-of-Spain, Sydney, Caracas, Singapore, Atyrau, Manama, Kolkata, Riyadh, Jamshedpur, Brisbane, Toronto, Noida, Ahvaz, Vadodara, Doha, Visakhapatnam, Ulsan, New Delhi, Gurgaon, Bogota, Howrah, Moscow, Nashik, Ranchi, Nagpur, Al Jubail, Houston, Milan, Chiyoda, Aberdeen, Melbourne, New York, Dammam, Montreal, Santiago, Kuwait City, Pune, Tehran, Thiruvananthapuram, Faridabad, Madrid, Ankara, Navi Mumbai, Indore, Baroda, Muscat, Secunderabad, Gimhae-si, Kanpur, Colombo, Kuala Lumpur, Bhopal, Pimpri-Chinchwad, Rajkot, Haryana, Hanoi, Ernakulam, Chandigarh, Surat, Los Angeles, Hong Kong, Ahmedabad, Perth, Petaling Jaya, Hyderabad, Mumbai, Algiers, Edmonton, Ludhiana, Ho Chi Minh City.
Kerala, Ahvaz, Melbourne, Geoje-si, Haryana, Sila, Bogota, Abu-Dhabi, Hyderabad, Tamil-Nadu, Al-Ain, London, Thane, Dallas, La-Victoria, Al-Khobar, Kuala-Lumpur, Jamshedpur, Ranchi, Gurgaon, Khor-Fakkan, Bangkok, Andhra-Pradesh, Toronto, Madhya-Pradesh, Uttar-Pradesh, Ajman, Los-Angeles, Indore, Surat, Brisbane, Busan, Calgary, Karachi, Ernakulam, Houston, Bhiwandi, Rio-de-Janeiro, Ulsan, Hong-Kong, Hougang, Madrid, Rajkot, Algiers, Istanbul, Moscow, Bikaner, Vung-Tau, Yishun, Ahmedabad, Karnataka, Bengaluru, Manchester, Sydney, Jharkhand, Perth, Santiago, Al-Jubail, Courbevoie, New-York, Ludhiana, Pimpri-Chinchwad, Kota-Kinabalu, Ankara, Manama, Faridabad, Aberdeen, London, Jakarta, Jebel-Ali, Edmonton, Gimhae-si, Kolkata, Pune, Nashik, Coimbatore, Petaling-Jaya, Chiyoda, Jaipur, Granada, Montreal, Bhopal, Lahore, Bristol, Assam, Colombo, Hanoi, Singapore, Visakhapatnam, Maharashtra, Birmingham, Thiruvananthapuram, Atyrau, Glasgow, Noida, Riyadh, Dubai, Baroda, Navi-Mumbai, Queenstown, Sharjah, Vadodara, Mexico-City, New-Delhi, Mumbai, Bangalore, Ras-al-Khaimah, Chennai, Rajasthan, Doha, Bhavnagar, Muscat, Secunderabad, Chandigarh, Umm-al-Quwain, Jeddah, Seoul, Nagpur, Kanpur, Lagos, Howrah, Tehran, Dammam Kuwait-City, Ho-Chi-Minh-City.
Copyright © 2024 Navrang Steel | Designed By Rathinfotech.com | Sitemap
